C o n t r o l   p a n e l
Restore default IAP
Your device contains predefined, default Internet access points that are generated automatically when a new SIM card is inserted
into your device for the first time. If you delete these access points, you can restore them with the 
Restore default IAP
 application.
To restore the predefined Internet access points, select 
Connections
 > 
Restore default IAP
, and press 
Yes
.
Security
Go to 
Desk
 > 
Tools
 > 
Control panel
 > 
Security
.
Device security
You can modify the security settings for the PIN code, automatic locking of the device, and changing of the SIM card. You can
also change the PIN code, PIN2 code, lock code, and restriction password.
Avoid using codes that are similar to emergency numbers, such as 112, to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When changing a code, enter the current code, and then the new code twice.
Defining device lock settings
Important:  In offline profile you cannot make (or receive) any calls, or use other features that require GSM network
coverage. To make any calls, you must first activate the phone function by changing the profile. You may, however, be
able to make an emergency call in offline profile by pressing the power key on the cover of the device and then entering
the official emergency number. This can be done using the cover phone interface only, not the communicator interface.
If the device has been locked, enter the lock code to activate the phone function. When the device is locked, calls may
still be possible to the official emergency number.
Making an emergency call in offline profile or when the device is locked requires that the device recognizes the number
to be an official emergency number. It may be advisable to change the profile or unlock the device by entering the
lock code before you make the emergency call.
To define device lock settings, select 
Security
 > 
Device security
, and select the 
Device lock
 page.
Define the following:
Autolock period
   You can set a time out after which the device is automatically locked and can be used only if the correct
lock code is entered. When the device is locked, calls may still be possible to the official emergency number programmed
into your device. You can also answer incoming calls.
Lock code
   Press 
Change
 to change the lock code. The new code must be 5 to 10 digits long. The preset code is 12345. To
avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from
your device.
Lock if SIM card is changed
   You can set the device to ask for the lock code when an unknown SIM card is inserted into your
device. The device maintains a list of SIM cards that are recognized as the owner s cards.
Allow remote locking
   If you set this option to 
Yes
, you can lock the device by sending a predefined text message from
another phone.
To create a remote locking message, select 
Security
 > 
Device security
. Set the option 
Allow remote locking
 to 
Yes
, enter your
lock code, and enter text for the remote locking message in the 
Message
 field. Confirm the message, and press 
Done
. The remote
locking message is case sensitive and can be 5 to 20 characters or digits long. Press 
Reboot
 to restart the device and for the
changes to take effect.
Tip: If you use a memory card with no password, the memory card will be locked when you lock your device with the
remote locking message. To remove the memory card password, select 
Desk
 > 
Office
 > 
File manager
, press Menu,
and select 
Memory card
 > 
Security
 > 
Remove password...
. Enter the remote locking message as your password, and
press 
Remove
. If the remote locking message is longer than 8 characters, the first 8 characters of the message are used
as the memory card password.
Defining PIN code settings
To define PIN code settings, select 
Security
 > 
Device security
, and select the 
PIN codes
 page.
Define the following:
PIN code request
   If you set this option to 
On
, the PIN code is requested each time the phone is switched on. Note that this
setting cannot be changed if the phone is switched off or if there is no valid SIM card inserted. Note also that some SIM cards
do not allow you to turn off the PIN code request.
PIN code
   Press 
Change
 to change the PIN code. The PIN code must be 4 to 8 digits long. Changing the PIN code requires
that 
PIN code request
 is selected, the device is on, and that there is a valid SIM card inserted.
PIN2 code
   Press 
Change
 to change the PIN2 code. The PIN2 code must be 4 to 8 digits long. The PIN2 code is required to
access some functions, such as the fixed dialing settings, which must be supported by your SIM card.
Copyright   2005 Nokia. All Rights Reserved.
70





Actions web hosting footer




 

 

 

 

Home | About Us | Network | Compare Plans | Support | FAQ | Control Panel | Order Online | Sitemap | Contact

Terms Of Service

jsp web hosting

 

Our web partners: Web Hosting PHP Jsp Web Hosting Java Web Hosting Jsp Web Hosting Cheapest Web Hosting  Java Web Hosting

Cheap Web Hosting Java Hosting Cheapest Hosting Quality Web Templates Best Web Templates Web Design Templates

Java Web Hosting Cheap Hosting Cheap Web Hosting Jsp Web Hosting Tomcat Web Hosting

Quality Web Hosting Best Web Hosting Java Web Hosting

Actionswebhosting.com Business web hosting division of Vision Web Hosting Inc. All rights reserved.